Concrete Pool Deck Sealers  /  Products  /  DECK-O-GRIP – Slip-Resistant Concrete Deck Treatment

DECK-O-GRIP – Slip-Resistant Concrete Deck Treatment

DECK-O-GRIP Acrylic, Slip-Resistant Concrete Deck TreatmentDECK-O-GRIP is a non-yellowing, acrylic-based, high solids, transparent, easy-to-apply liquid cure and seal. It provides a clear, flexible and durable abrasion- and stain-resistant protective film. DECK-O-GRIP also offers improved resistance to most of today’s common pool chemicals. It is specifically designed to retain and enhance the appearance of colored concrete and exposed aggregate surfaces for years to come. The compound contains a slip-resistant additive, which establishes an easy-to-clean, non-slip surface for traditionally slippery areas.

  • Provides a totally clear membrane for new or existing concrete that will not yellow.
  • Seals all concrete surfaces, providing a glossy appearance and easier clean up.
  • Dustproofs concrete with a tough, durable film.
  • Helps minimize spalling of exterior concrete.
  • Provides good blush resistance in damp areas.
  • Applies easily … dries to the touch in 30 – 60 minutes.
  • Provides a clear, tough film that improves abrasion and stain resistance.
  • Offers improved resistance to rain, sun, freezing temperatures and pool chemicals.
  • Seals and enhances the beauty of many concrete surfaces for years.
  • Offers excellent non-skid foot traffic wearing qualities.
  • Can be recoated after thorough surface cleaning to restore original beauty.
  • VOC compliant.

View DECK-O-GRIP Technical Specifications


DECK-O-GRIP Concrete and Tile Deck SealerConcrete & Tile Deck Sealer

DECK-O-GRIP is a non-yellowing, high solids, transparent, easy-to-apply concrete and tile sealer, designed for exterior swimming pool decks, patios, sidewalks, and porches. It is specifically designed to retain and enhance the appearance of your deck.

  • Provides a clear sealer for new or existing surfaces that will not yellow
  • Special non-slip additive offers skid resistance (ASTM C 1028 Static Coefficient of Friction Wet ≥ .60) DECK-O-GRIP – Dry ≥ .90 / Wet ≥ .85
  • Manufactured in both solvent-base and water-base formulas to meet applicable national, state, and local EPA requirements
  • Seals surfaces, providing a glossy “wet look” appearance
  • Low water absorption
  • Improved stain resistance
  • Easy to clean
  • Applies easily by rolling or spraying … dries quickly
  • Can be re-coated
  • Offers improved resistance to rain, sun, and pool chemicals

Next Steps: Contact Us | Locate a Distributor

{ 2 comments }

charly July 17, 2011 at 8:56 pm

do you recommend DECK-O-GRIP on natural stone surfaces around a pool, such as the coping, spa spillway, and spa veneer?

Admin July 18, 2011 at 11:54 am

Charly,
I would not recommend DECK-O-GRIP on the natural stone on the coping. I would use Deck-O-Shield. Thanks for your interest!

U.S. Green Building Council Association of Pool & Spa Professionals Independent Pool & Spa Service Association National Plasterers Council

For further green and LEED information on DECK-O-SEAL products, visit the W. R. MEADOWS Green Page.