|
|
DESCRIPTION
DECK-O-JOINT is an attractive and decorative vinyl control joint.
Economical DECK-O-JOINT is long lasting and trouble- free. It
resists most chemicals. A light hose- down keeps it bright and
clean.
DECK-O-JOINT will not whip or warp. It protects against cracking and buckling. Generally, damage caused by excessive water flow through joints is reduced. The advanced design and exclusive self-leveling of DECK-O-JOINT provides a protective ledge, which locks to concrete and seals against seepage and excessive water flow. This helps prevent and reduce water damage in the joint caused by excessive flow through. DECK-O-JOINT also offers maximum sealing.
USES
DECK-O-JOINT is designed to provide the quality finishing touch
to patios, driveways, sidewalks, pool decks or wherever concrete
is used.
FEATURES AND BENEFITS
|
|
COLOR DIMENSIONS PACKAGING |
|
APPLICATION
Joint Preparation Ten foot lengths, cut to size, are simply put into position before tamping. For a professional finish to the job, score along the edges of the top joint with a fine edger tool. DECK-O-JOINT is now a part of the surface with built-in protection and beauty. Short runs require no staking. ![]() |
|
|
July 2004
LIMITED
WARRANTY
"DECK-O-SEAL®, A Division of W. R. MEADOWS, INC., warrants
at the time and place we make shipment, our material will be of
good quality and will conform with our published specifications
in force on the date of acceptance of the order." Read complete
warranty. Copy furnished upon request.
Disclaimer
The information contained herein is included for illustrative
purposes only, and to the best of our knowledge, is accurate and
reliable. DECK-O-SEAL cannot however under any circumstances make
any guarantee of results or assume any obligation or liability
in connection with the use of this information. As DECK-O-SEAL
has no control over the use to which others may put its product,
it is recommended that the products be tested to determine if
suitable for specific application and/or our information is valid
in a particular circumstance. Responsibility remains with the
architect or engineer, contractor and owner for the design, application
and proper installation of each product. Specifier and user shall
determine the suitability of products for specific application
and assume all responsibilities in connection therewith.