For years, DECK-O-SEAL has been a well known and trusted name for pool deck construction, reconstruction, and protection. Our joint sealant products have become a mainstay in the pool industry.
We also provide curing and sealing compounds, expansion joints, and various other products to create a pool deck that will last. Our products are also a great fit for restoration and refurbish projects to make that old deck look good as new.
Whether you plan to protect your brand-new deck from salt staining, or you are planning a rejuvenation project on your old surface, do it right with DECK-O-SEAL.
View the Sealers Chart to choose the right deck sealer for your application:
DECK-O-SHIELD is a ready-to-use, water-based sealer/water repellent for natural stone, concrete, and masonry surfaces. DECK-O-SHIELD is designed for use as a sealer/water repellent on waterfalls in or around swimming pools; the product will limit the penetration of water into structurally sound, crack-free surfaces. The product also can be used as a sealer/water repellent for natural stone decks, copings, walkways, or patios; virtually any area located near or around swimming pool areas. A DECK-O-SHIELD treated surface will inhibit
DECK-O-SHIELD PLUS is a premium-grade, ready-to-use, water-based sealer formulated for use on natural stone. DECK-O-SHIELD PLUS is formulated
DECK-O-TREAT Concrete Curing Aid is a ready to use curing aid formulated to aid in curing gunite and shotcrete. It contains no wax, resin, or acids and is VOC compliant. Eliminates the need to water gunite or shotcrete several times a day for seven days. Surfaces treated with DECK-O-TREAT can later be covered by additional finishes such as paint, tile, adhesive or plaster.
|>> Request More Info|
DECK-O-GRIP is a non-yellowing, acrylic-based, high solids, transparent, easy-to-apply liquid cure and seal. It provides a clear, flexible and durable abrasion- and stain-resistant protective film. DECK-O-GRIP also offers improved resistance to most of today’s common pool chemicals. It is specifically designed to retain and enhance the appearance of colored concrete and exposed aggregate surfaces for years to come. The compound contains a slip-resistant additive, which establishes an easy-to-clean, non-slip surface for traditionally slippery areas. DECK-O-GRIP provides a gloss finish to the surface.
DECK-O-GRIP W/B is a water-based formulation that meets the very strict maximum VOC content limits of 200 g/L for sealers as required by certain
California Air Pollution Control Districts, as well as the 400 g/L VOC maximum required by the U.S. EPA Architectural Coatings rule for Sealers. DECK-O-GRIP W/B provides a gloss finish to the surface. DECK-O-GRIP W/B has the same benefits and properties of our standard DECK-O-GRIP product, such as stain- and slip resistance.
BELLATRIX® may be utilized anywhere a clear, high-gloss, dual-action concrete protection system is desired. BELLATRIX is formulated using dual-protection technology combined with unique hybrid polymers, to offer the ultimate in concrete protection. Proprietary, dual-action technology provides the ultimate in both penetrating and film-forming concrete protection. BELLATRIX offers environmentally friendly, VOC-compliant protection, which provides increased stain suspension and resistance against most contaminants found in pool decks. BELLATRIX offers a satin finish to the surface.
Joint Sealants & Expansion Joints
OUR JOINT SEALANTS AND EXPANSION JOINTS WILL PROTECT YOUR POOL DECK FROM CONCRETE MOVEMENT AND WATER INTRUSION, WHILE ALSO MAINTAINING THE AESTHETIC LOOK OF YOUR DECK
Seal all cracks and joints with DECK-O-SEAL two-part, elastomeric, polysulfide-based joint sealant. It is ideal for sealing joints in and around swimming pools, and is applicable for both interior and exterior compression or elongation.
DECK-O-SEAL is available in a variety of formulations to meet every need in pool deck construction
DECK-O-SEAL two-part, polysulfide-based joint sealant is a premium-grade, pourable, self-leveling sealant.
DECK-O-SEAL 125 two-part, pourable joint sealant is a self-leveling, polysulfide-based sealing compound. It is a non-staining sealant that cures to a firm, flexible, tear-resistant rubber. DECK-O-SEAL 125 is a self-leveling product that is engineered for submerged applications and heavy traffic areas.
DECK-O-SEAL GUN GRADE is a two-component, non-sag, non-flowing, polysulfide-based sealing compound. It is designed for vertical applications as well as submerged applications.
DECK-O-SEAL ONE STEP® is a single-component, non-sag, elastomeric, polysulfide-based sealing compound used for caulking joints in structures that are subject to movement caused by temperature changes.
KOOL-ROD™ is a closed cell, polyethylene, flexible, rope-like foam joint backing material. This material is virtually non-absorbent and chemically inert to most solvents. KOOL-ROD will not stain or adhere to sealant materials. It is fully compatible with acrylic, butyl, polyurethane, polysulfide, silicone, and most other cold-applied sealant compounds.
DECK-O-FOAM expansion joint filler is a flexible, lightweight, non-staining, polyethylene, closed-cell expansion joint filler. It is a chemical-resistant, ultraviolet stable, non-absorbent, low density, economical, compressible foam that offers an extended service life in both interior and exterior applications.
DECK-O-DRAIN® drainage system provides an effective drainage system for concrete pool decks. Wherever specified, the system effectively collects and carries water away quickly from pool decks and other patio areas. Made of tough, long lasting PVC, the DECK-O-DRAIN system resists wear and is non-corrosive. Both the deck and subgrade receive watertight protection.
DECK-O-JOINT® is an attractive and decorative vinyl control joint. Economical DECK-O-JOINT is long lasting and trouble- free. It resists most chemicals. A light hose- down keeps it bright and clean. DECK-O-JOINT will not whip or warp. It protects against cracking and buckling. Generally, damage caused by excessive water flow through joints is reduced. The advanced design and exclusive self-leveling of DECK-O-JOINT provides a protective ledge, which locks to concrete and seals against seepage and excessive water flow. DECK-O-JOINT provides a plane of weakness to help control cracking.
RENU-STRIP® is a flexible and rugged vinyl capping strip designed to make faded or broken DECK-O-JOINT look brand new. It fits all DECK-O-JOINT Expansion Joints or any other 5/8” wide plastic joint. The fast and easy installation of RENU-STRIP offers an economical way to revitalize an existing pool deck’s appearance.
W. R. Meadows Products for use in Pool Deck Applications
MEADOW-PLUG™ is a specially blended, extremely fast setting, hydraulic cement product designed to instantly stop running water or fluid seepage in concrete or masonry structures. This single component, high strength repair mortar permanently plugs non-moving cracks, joints, and voids.
SPEED-E-ROC™ is a pourable, rapid setting and hardening, high strength, hydraulic cement compound designed for anchoring and grouting. SPEED-E-ROC has a controlled expansion system and is non-shrink. SPEED-E-ROC has an initial set time of 10-20 minutes at 77° F (25° C) and obtains 5,000 psi (34.4 MPa) in one hour.
ACRY-LOK™ is a high solids, acrylic polymer latex bonding agent and admixture. This milky white liquid is non-yellowing in Portland cement mortars and concrete. When used as an admixture, ACRY-LOK provides increased abrasion and crack resistance, flexural strength, and freeze/thaw tolerance. Permeability is also reduced, providing added protection from chloride intrusion.
REZI-WELD™ LV STATE is an ultra-low viscosity, rapid setting, epoxy-based, structural injection resin. This anchoring adhesive and injection resin is moisture insensitive and provides high mechanical properties and bond strength to concrete and various other substrates. REZI-WELD LV STATE resists most chemicals and forms a structural monolithic bond.
REZI-WELD 1000 STATE is a medium viscosity, two-component, construction-grade structural epoxy adhesive. It is moisture-insensitive and resistant to many chemicals. High modulus, high strength REZI-WELD 1000 STATE is color coded to assure proper mixing. It is self-leveling and easy to apply.
REZI-WELD GEL PASTE is a high viscosity, rapid setting, thixotrophic, structural, epoxy-based, chemical anchoring/bonding adhesive and injection resin. REZI-WELD GEL PASTE provides high mechanical properties and bond strength to concrete and various other substrates. REZI-WELD GEL PASTE is a two-component, moisture insensitive construction epoxy, which can be troweled, brushed, injected, or pumped.
ALL THE PRODUCTS IN THE DECK-O-SEAL LINE CAN BE USED IN POOL DECK REFURBISHMENT. USING ALL THE PRODUCTS IN OUR LINE CAN HELP MAKE AN OLD POOL DECK LOOK NEW AGAIN.
Request More Info: